PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 509414ITEM13
509414ITEM13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, overall_width: 4.500 INCHES NOMINAL IN, aperture_width: 3.500 INCHES NOMINAL IN, overall_length: 6.000 INCHES NOMINAL IN, aperture_length: 3.530 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-044-5162, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
509414ITEM13
NSN: 5330-01-044-5162
FSC: 5330
CAGE: 44674 — THE OILGEAR COMPANY DBA JIFFY LUBE 213 DIV OILGEAR (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
overall_width4.500 INCHES NOMINAL IN
aperture_width3.500 INCHES NOMINAL IN
overall_length6.000 INCHES NOMINAL IN
aperture_length3.530 INCHES NOMINAL IN
bolt_hole_quantity8
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-044-5162
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 509414ITEM13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: CELLULOSE OVERALL
•
APERTURE WIDTH: 3.500 INCHES NOMINAL IN
•
APERTURE LENGTH: 3.530 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 8
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCELLULOSE OVERALL
OVERALL WIDTH4.500 INCHES NOMINAL IN
APERTURE WIDTH3.500 INCHES NOMINAL IN
APERTURE LENGTH3.530 INCHES NOMINAL IN
OVERALL LENGTH6.000 INCHES NOMINAL IN
BOLT HOLE QUANTITY8
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
23555Interchangeable
interchangeable cross-reference
interchangeable
T1673Interchangeable
interchangeable cross-reference
interchangeable
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
50556Interchangeable
interchangeable cross-reference
interchangeable
SCB69999Interchangeable
interchangeable cross-reference
interchangeable
P96Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 509414ITEM13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 509414ITEM13?
509414ITEM13 is a GASKET.
What parts can replace 509414ITEM13?
There are 19 known substitutes for 509414ITEM13: 23555, T1673, ASTM B221 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 509414ITEM13?
509414ITEM13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-044-5162. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 509414ITEM13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026