PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50916
50916 ✓ Verified by PartsTable
Sandberg · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

If you have DisplayPort in a device you would like to connect to your TV / monitor via the HDMI input, then this cable is the solution for you!. Key specifications include material: STEEL COMP 303 OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.031 INCHES NOMINAL IN, pin_overall_diameter: 0.3120 INCHES MINIMUM AND 0.3122 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-012-4548, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50916
NSN: 5315-00-012-4548
FSC: 5315
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.031 INCHES NOMINAL IN
pin_overall_diameter0.3120 INCHES MINIMUM AND 0.3122 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.030 INCHES NOMINAL IN
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-012-4548
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 50916 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY SIZE DESIGNATION: WOODRUFF 8
•
CIRCLE DIAMETER: 0.750 INCHES NOMINAL IN
•
KEY HEIGHT: 0.308 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: ROUND BOTTOM
•
THICKNESS: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
KEY SIZE DESIGNATIONWOODRUFF 8
CIRCLE DIAMETER0.750 INCHES NOMINAL IN
KEY HEIGHT0.308 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORROUND BOTTOM
THICKNESS0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
103906Interchangeable
interchangeable cross-reference
interchangeable
PL53Interchangeable
interchangeable cross-reference
interchangeable
2165AInterchangeable
interchangeable cross-reference
interchangeable
12910Interchangeable
interchangeable cross-reference
interchangeable
8A91001Interchangeable
interchangeable cross-reference
interchangeable
30023Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50916?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50916?
50916 is a KEY,WOODRUFF manufactured by Sandberg.
What parts can replace 50916?
There are 23 known substitutes for 50916: 103906, PL53, 2165A and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50916?
50916 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-012-4548. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50916

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026