PartsTable
Technical Data Sheet
PartsTable / MRO / 50778
50778 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The CALIPER SET,MICROMETER,OUTSIDE is a Sandberg industrial component. Key specifications include locknut: INCLUDED, shaft_type: THREADED, body_height: 2.750 INCHES MAXIMUM IN, felt_washer: NOT INCLUDED, thread_size: 5/16-18, gaging_range: +9.000 TO 12.000 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5210-00-287-3337, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50778
NSN: 5210-00-287-3337
FSC: 5210
CAGE: 57163 — L.S. STARRETT COMPANY (THE) DIV TOOL DIVISION (USA)
SPECIFICATIONS
locknutINCLUDED
shaft_typeTHREADED
body_height2.750 INCHES MAXIMUM IN
felt_washerNOT INCLUDED
thread_size5/16-18
gaging_range+9.000 TO 12.000 INCHES IN
linkage_typeSHAFT
ratchet_stopINCLUDED
overall_width3.125 INCHES NOMINAL IN
thread_length1.000 INCHES IN
inclosure_typeOPEN
overall_length36.000 INCHES NOMINAL IN
NSN5210-00-287-3337
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Sandberg CALIPER SET,MICROMETER,OUTSIDE TITLE COMPONENT PN 50778 MFR Sandberg CALIPER SET,MICROMETER
KEY FEATURES
•
RATCHET STOP: INCLUDED
•
LOCKNUT: INCLUDED
•
PUSHBUTTON PRESSURE CONTROL: NOT INCLUDED
•
GAGING RANGE: +9.000 TO 12.000 INCHES IN
•
GRADUATION UNIT: THOUSANDTHS OF AN INCH
TECHNICAL CHARACTERISTICS (FLIS)
RATCHET STOPINCLUDED
LOCKNUTINCLUDED
PUSHBUTTON PRESSURE CONTROLNOT INCLUDED
SPECIAL FEATURESFURNISHED WITH 9, 10 AND 11 IN. STANDARDS IN PROTECTIVE CASE IN
GAGING RANGE+9.000 TO 12.000 INCHES IN
GRADUATION UNITTHOUSANDTHS OF AN INCH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
GGG-C-105 TY1CL1STBInterchangeable
interchangeable cross-reference
interchangeable
GGG-C-105Interchangeable
interchangeable cross-reference
interchangeable
224ERLZInterchangeable
interchangeable cross-reference
interchangeable
50784Interchangeable
interchangeable cross-reference
interchangeable
72705Interchangeable
interchangeable cross-reference
interchangeable
05-0024-9700Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50778?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50778?
50778 is a CALIPER SET,MICROMETER,OUTSIDE manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50778?
There are 22 known substitutes for 50778: GGG-C-105 TY1CL1STB, GGG-C-105, 224ERLZ and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50778?
50778 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5210-00-287-3337. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50778

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026