PartsTable
Technical Data Sheet
PartsTable / MRO / 50772
50772 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include general_characteristics_item_description: MATERIAL STEEL COLD ROLLED,QUARTER HARD TEMPER REGULAR BRIGHT FINISH PER SPEC QQ-S-636,0.047 IN. THK IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5257, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50772
NSN: 5340-00-205-5257
FSC: 5340
CAGE: 61864 — TRW ASSEMBLIES AND FASTENERS GROUP (USA)
SPECIFICATIONS
general_characteristics_item_descriptionMATERIAL STEEL COLD ROLLED,QUARTER HARD TEMPER REGULAR BRIGHT FINISH PER SPEC QQ-S-636,0.047 IN. THK IN
NSN5340-00-205-5257
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50772 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY
•
HOLE ACCOMMODATION DIAMETER: 0.562 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
PRONG QUANTITY: 8
•
PRONG OUTSIDE DIAMETER: 0.594 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
SURFACE TREATMENT: CADMIUM
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY
HOLE ACCOMMODATION DIAMETER0.562 INCHES NOMINAL IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
PRONG QUANTITY8
PRONG OUTSIDE DIAMETER0.594 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
SURFACE TREATMENTCADMIUM
OVERALL HEIGHT0.281 INCHES NOMINAL IN
HEAD OUTSIDE DIAMETER0.718 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
05-0006-9400Interchangeable
interchangeable cross-reference
interchangeable
224ARLZInterchangeable
interchangeable cross-reference
interchangeable
M06Interchangeable
interchangeable cross-reference
interchangeable
50772Interchangeable
interchangeable cross-reference
interchangeable
SC-B-69964Interchangeable
interchangeable cross-reference
interchangeable
39616Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50772?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50772?
50772 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50772?
There are 15 known substitutes for 50772: 05-0006-9400, 224ARLZ, M06 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50772?
50772 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5257. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50772

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026