PartsTable
Technical Data Sheet
Download PDF

50765 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
Sandberg · MRO · MRO_GENERAL
PRODUCT OVERVIEW

50765: BEARING,ROLLER,NEEDLE.

You can use this cable to connect a computer with DVI output to a TV with 5 Phono input ports, enabling your computer screen to be displayed on the TV. Key specifications include overall_width: 0.750 INCHES NOMINAL IN, overall_height: 4.500 INCHES NOMINAL IN, overall_length: 6.560 INCHES NOMINAL IN, end_item_identification: COMPUTER SYSTEM,DIGITAL AN/USQ-117, part_name_assigned_by_controlling_agency: INTERNAL TCIM BOARD. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-151-9389, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50765
NSN: 3110-00-151-9389
NIINs: 001519389, 003429831, 005067903, 011091247, 013699287
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
overall_width0.750 INCHES NOMINAL IN
overall_height4.500 INCHES NOMINAL IN
overall_length6.560 INCHES NOMINAL IN
end_item_identificationCOMPUTER SYSTEM,DIGITAL AN/USQ-117
part_name_assigned_by_controlling_agencyINTERNAL TCIM BOARD
NSN3110-00-151-9389
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 50765 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.2500 INCHES MINIMUM AND 2.4995 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: SELF-ALIGNING
•
BORE DIAMETER: 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL WIDTH1.3700 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.2500 INCHES MINIMUM AND 2.4995 INCHES MAXIMUM IN
ALIGNMENT TYPESELF-ALIGNING
BORE DIAMETER1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
W1381AReference document
Same NSN cross-reference
Reference document — Secondary reference
425690-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 50765?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50765?
50765 is a BEARING,ROLLER,NEEDLE manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50765?
There are 2 known substitutes for 50765: W1381A, 425690-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 50765?
50765 is cataloged in the U.S. Government catalog under NSN 3110-00-151-9389. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50765

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.