PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50725
50725 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Sandberg PowerBar is rated at 230V AC. All the sockets on the Sandberg PowerBar accept 3-pin earthed plugs, but the mains socket only needs to accept 2-pin plugs (unearthed). The Sandberg PowerBar is equipped with a switch that enables you to switch all connected units on or off by pressing a single button.

This enables you to save power compared to having the equipment in standby. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-351-7951, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
50725
NSN: 5330-00-351-7951
FSC: 5330
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
switch_typePUSH
hole_diameter0.147 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.125 INCHES MINIMUM AND 1.155 INCHES MAXIMUM IN
inclosure_typeUNINCLOSED
overall_height2.830 INCHES MAXIMUM IN
overall_length2.065 INCHES MINIMUM AND 2.095 INCHES MAXIMUM IN
special_featuresACTION ID 45400135
bolt_hole_quantity4
controlling_agencySANDERS ASSOCIATES INC
identifying_numberSCN233021+8 PART NO. AND SCN233021+9 PART NO.
end_item_identificationREEL ASSEMBLY,HOSE
NSN5330-00-351-7951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50725 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.147 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
•
MATERIAL: CELLULOSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL WIDTH3.770 INCHES NOMINAL IN
HOLE DIAMETER0.147 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESONE BOLT HOLE 0.188 IN. DIA IN
BOLT HOLE QUANTITY4
MATERIALCELLULOSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
50725Interchangeable
interchangeable cross-reference
interchangeable
20433Interchangeable
interchangeable cross-reference
interchangeable
AMI7795Interchangeable
interchangeable cross-reference
interchangeable
233021P29Interchangeable
interchangeable cross-reference
interchangeable
61520-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50725?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50725?
50725 is a NOZZLE,AERIAL PRESSURE REFUELING manufactured by Sandberg.
What parts can replace 50725?
There are 5 known substitutes for 50725: 50725, 20433, AMI7795 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50725?
50725 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-351-7951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50725

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026