PartsTable
Technical Data Sheet
50665 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

This is no less than a revolution in network cabling. Until now, we have only known UTP cables as round cables, but now new flat cables have been developed that take up significantly less space and are much lighter. Perfect for laying under a carpet, behind a desk or simply to give you less to carry around with your laptop.

Available in trendy black to suit modern computer environments. Used either to connect a computer to a hub/switch or to link two hubs or switches together via the uplink port. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-127-5793, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 50665
NSN: 5999-01-127-5793
FSC: 5999
CAGE: 32155 — POLARA ENGINEERING, INC. (USA)
SPECIFICATIONS
model_number590
special_featuresSWITCHABLE TO 220V, 50/60 HZ V
frequency_in_hertz50.0 MINIMUM AND 60.0 MAXIMUM
displacement_rating90.0 CUBIC FEET PER MINUTE MINIMUM AND 260.0 CUBIC FEET PER MINUTE MAXIMUM
NSN5999-01-127-5793
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 50665 MFR Sandberg TELETYPEWRITER SUBASSEMBLY
KEY FEATURES
MOUNTING FACILITY: TERMINAL
PULSE RISE TIME RATING: 10.0 NANOSECONDS NS
BODY WIDTH: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
SIGNAL DELAY METHOD: LUMPED CONSTANT
BODY LENGTH: 0.640 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
OUTPUT IMPEDANCE RATING: 100.000 OHMS
INPUT IMPEDANCE RATING: 100.000 OHMS
BODY DEPTH: 0.200 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITYTERMINAL
PULSE RISE TIME RATING10.0 NANOSECONDS NS
BODY WIDTH0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
SIGNAL DELAY METHODLUMPED CONSTANT
BODY LENGTH0.640 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
OUTPUT IMPEDANCE RATING100.000 OHMS
INPUT IMPEDANCE RATING100.000 OHMS
BODY DEPTH0.200 INCHES MAXIMUM IN
MOUNTING FACILITY QUANTITY14
SEGMENT DELAY TIME7.500 NANOSECONDS MAXIMUM SINGLE SECTION ALL SEGMENTS NS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
MH6D25-5VDCInterchangeable
interchangeable cross-reference
interchangeable
MIL-R-5757/8Interchangeable
interchangeable cross-reference
interchangeable
RY4LA3B3L01Interchangeable
interchangeable cross-reference
interchangeable
50665Interchangeable
interchangeable cross-reference
interchangeable
50665AInterchangeable
interchangeable cross-reference
interchangeable
SC-B-70202Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 50665?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50665?
50665 is a TELETYPEWRITER SUBASSEMBLY manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50665?
There are 17 known substitutes for 50665: MH6D25-5VDC, MIL-R-5757/8, RY4LA3B3L01 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50665?
50665 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-127-5793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50665