PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50656
50656 ✓ Verified by PartsTable
Sandberg · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This USB 2.0 cable allows you to connect all types of USB device to a computer, hub or other USB device. USB 2.0 cables support speeds of up to 480 Mbit/s. Can be used with both USB 1.1 and USB 2.0 devices.

It has a type-A connector at one end and a type-B connector at the other. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-5949, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
50656
NSN: 3110-00-100-5949
FSC: 3110
CAGE: 04627 — HYSTER-YALE GROUP, INC. DIV HYSTER-YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.9375 INCHES NOMINAL IN
cone_width1.1830 INCHES NOMINAL IN
bore_diameter2.5000 INCHES NOMINAL IN
overall_width1.1875 INCHES NOMINAL IN
standout_width0.2500 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter4.4375 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-5949
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 50656 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CUP WIDTH: 0.9375 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.2500 INCHES NOMINAL IN
•
BORE DIAMETER: 2.5000 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 4.4375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CUP WIDTH0.9375 INCHES NOMINAL IN
STANDOUT WIDTH0.2500 INCHES NOMINAL IN
BORE DIAMETER2.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.4375 INCHES NOMINAL IN
OVERALL WIDTH1.1875 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH1.1830 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
8-771Interchangeable
interchangeable cross-reference
interchangeable
3373695Interchangeable
interchangeable cross-reference
interchangeable
25800Interchangeable
interchangeable cross-reference
interchangeable
99018-14Interchangeable
interchangeable cross-reference
interchangeable
225438Interchangeable
interchangeable cross-reference
interchangeable
D11571Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50656?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50656?
50656 is a BEARING,ROLLER,TAPERED manufactured by Sandberg.
What parts can replace 50656?
There are 20 known substitutes for 50656: 8-771, 3373695, 25800 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50656?
50656 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-5949. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50656

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026