PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5061-3
5061-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include overall_length: 2.094 INCHES NOMINAL IN, special_features: OPERATING TEMPERATURE IS -40 DEG.TO +125 DEG F. DEGF, end_item_identification: CARGO SYSTEM,463L.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-397-1481, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5061-3
NSN: 5340-00-397-1481
FSC: 5340
CAGE: 02106 — MRL INC (USA)
SPECIFICATIONS
overall_length2.094 INCHES NOMINAL IN
special_featuresOPERATING TEMPERATURE IS -40 DEG.TO +125 DEG F. DEGF
end_item_identificationCARGO SYSTEM,463L
NSN5340-00-397-1481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5061-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG LENGTH: 1.125 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
MATERIAL: ALUMINUM ALLOY 2024
•
HEAT TREATMENT: T-6 SOLUTION HEAT TREATED
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG LENGTH1.125 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
MATERIALALUMINUM ALLOY 2024
HEAT TREATMENTT-6 SOLUTION HEAT TREATED
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG THICKNESS0.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2533406-33Interchangeable
interchangeable cross-reference
interchangeable
55-2046Interchangeable
interchangeable cross-reference
interchangeable
P426Interchangeable
interchangeable cross-reference
interchangeable
7014968Interchangeable
interchangeable cross-reference
interchangeable
5-0-613Interchangeable
interchangeable cross-reference
interchangeable
426855Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5061-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5061-3?
5061-3 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 5061-3?
There are 14 known substitutes for 5061-3: 2533406-33, 55-2046, P426 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5061-3?
5061-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-397-1481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5061-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026