PartsTable
Technical Data Sheet
Download PDF

5060-3536 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

5060-3536: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.250 INCHES MAXIMUM IN, shaft_style: ROUND, shaft_length: 0.875 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, actuator_type: DUAL CONCENTRIC, body_diameter: 1.219 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-036-8698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5060-3536
NSN: 5905-00-036-8698
FSC: 5905 — Resistor
CAGE: 7ZXR5 — KEYSIGHT TECHNOLOGIES INC (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.250 INCHES MAXIMUM IN
shaft_styleROUND
shaft_length0.875 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
actuator_typeDUAL CONCENTRIC
body_diameter1.219 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
shaft_diameter0.188 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
mounting_methodSTANDARD BUSHING
overall_diameter1.425 INCHES MAXIMUM IN
section_quantity2
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
NSN5905-00-036-8698
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 5060-3536 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.00 INCH-OUNCES IN
•
BODY DIAMETER: 1.219 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 1.2 KILOHMS 1ST SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 105.0 ALL SECTIONS
•
SECTION QUANTITY: 2
•
SHAFT DIAMETER: 0.188 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES IN
BODY DIAMETER1.219 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION1.2 KILOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION20.0 OHMS 2ND SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER105.0 ALL SECTIONS
SECTION QUANTITY2
SHAFT DIAMETER0.188 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER1.425 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
2100-1803Reference document
Same NSN cross-reference
Reference document — Secondary reference
A2100-9079-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
43-1201JSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5060-3536?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5060-3536?
5060-3536 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5060-3536?
There are 3 known substitutes for 5060-3536: 2100-1803, A2100-9079-1, 43-1201J. Substitute compatibility should be verified for your specific system.
What is the NSN for 5060-3536?
5060-3536 is cataloged in the U.S. Government catalog under NSN 5905-00-036-8698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5060-3536