PartsTable
Technical Data Sheet
50580 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Even if your television or VCR has a great picture, it does not help much if the cable carrying the image and sound is not of similarly high quality. This handy cable ensures optimum image and sound transmission between your devices. The connectors are gold-plated and the cable itself is double-shielded and has ferrite cores to ensure optimum image reproduction.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5304, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
50580
NSN: 5340-00-205-5304
FSC: 5340
CAGE: 61864 — TRW ASSEMBLIES AND FASTENERS GROUP (USA)
SPECIFICATIONS
colorCHARCOAL BOTH SIDES
width24.000 INCHES NOMINAL IN
length24.000 INCHES NOMINAL IN
materialPLASTIC, POLYETHYLENE (PP) LOCATION NOT OTHERWISE SPECIFIED
thickness0.500 INCHES NOMINAL IN
garment_size9-1/2
special_featuresMANUFACTURER IS MAGNUM PRODUCTS LLC IN BERLIN, WI, AND DWG NUMBER IS 50580
end_item_identification6115-01-591-1161
part_name_assigned_by_controlling_agencyEXAM GLOVES
NSN5340-00-205-5304
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50580 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
PRONG QUANTITY: 12
HEAD OUTSIDE DIAMETER: 0.937 INCHES NOMINAL IN
SURFACE TREATMENT: CADMIUM
PRONG OUTSIDE DIAMETER: 0.766 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS: 0.037 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
STYLE DESIGNATOR: STANDARD
HEAD HEIGHT: 0.094 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PRONG QUANTITY12
HEAD OUTSIDE DIAMETER0.937 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
PRONG OUTSIDE DIAMETER0.766 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.037 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
HEAD HEIGHT0.094 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.750 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA81205-BAC+20 MANUFACTURERS SPECIFICATION
OVERALL HEIGHT0.297 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
50580Upgraded Successor
successor cross-reference
successor
MBR-200G8Interchangeable
interchangeable cross-reference
interchangeable
R200B21Interchangeable
interchangeable cross-reference
interchangeable
MBR-200G8KSA5Interchangeable
interchangeable cross-reference
interchangeable
110886Interchangeable
interchangeable cross-reference
interchangeable
1190442Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50580?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50580?
50580 is a SEAL,PLAIN ENCASED manufactured by Sandberg.
What parts can replace 50580?
There are 21 known substitutes for 50580: 50580, MBR-200G8, R200B21 and 18 more. Substitute compatibility should be verified for your specific system.
Is 50580 still available?
50580 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50580