PartsTable
Technical Data Sheet
Download PDF

50576 — PIN,STRAIGHT,HEADED

✓ Government record, cited
Sandberg · NUT WASHER
PRODUCT OVERVIEW

50576: PIN,STRAIGHT,HEADED.

Many people often forget about cables when investing in a new professional hi-fi system. Even if your VCR produces a good picture, it is of little use if the cable transmitting the sound is not of professional quality. This high-quality S-video cable is double-shielded and has gold-plated connectors to ensure that the picture is always razor sharp.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-266-7613, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
50576
NSN: 5315-00-266-7613
NIINs: 002667613, 008783908, 016773080
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 33844 — KLAUER MANUFACTURING COMPANY (USA)
SPECIFICATIONS
length9.5 INCHES IN
cuff_typeBEADED
garment_sizeSMALL
special_featuresMATERIAL, NITRILE
features_providedNONPOWDERED AND SMOOTH FINISH
hand_for_which_designedAMBIDEXTROUS
environmental_protectionCHEMICAL RESISTANT
part_name_assigned_by_controlling_agencyBLUE NITRILE EXAM GLOVES
NSN5315-00-266-7613
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 50576 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.031 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.719 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM AND 65.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.031 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.719 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
HARDNESS RATING58.0 ROCKWELL C MINIMUM AND 65.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.370 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
SUBSTITUTES & CROSS-REFERENCES 7
CL4586Reference document
Same NSN cross-reference
Reference document — Secondary reference
17-292391Reference document
Same NSN cross-reference
Reference document — Secondary reference
042216Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
50437DReference document
Same NSN cross-reference
Reference document — Secondary reference
0042216-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
0042216Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 50576?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50576?
50576 is a PIN,STRAIGHT,HEADED manufactured by Sandberg.
What parts can replace 50576?
There are 7 known substitutes for 50576: CL4586, 17-292391, 042216 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50576?
50576 is cataloged in the U.S. Government catalog under NSN 5315-00-266-7613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50576