PartsTable
Technical Data Sheet
Download PDF

50524 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
Sandberg · TAPERED BEARING
PRODUCT OVERVIEW

50524: CONNECTOR,RECEPTACLE,ELECTRICAL.

This adapter enables you to convert a stereo phono signal to mono. The adapter has two female phono jacks to one male phono jack. Key specifications include material: STEEL OVERALL, jaw_depth: 1.250 INCHES NOMINAL IN, thickness: 0.124 INCHES NOMINAL IN, body_style: ANGLE SHAPE, POWER TYPE, shell_type: HOOD, TOP OPENING, bore_diameter: 1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-227-2810, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50524
NSN: 3110-00-227-2810
NIINs: 002272810, 002591176, 002777549, 008949407, 013094258, 013107567, 015177169
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
jaw_depth1.250 INCHES NOMINAL IN
thickness0.124 INCHES NOMINAL IN
body_styleANGLE SHAPE, POWER TYPE
shell_typeHOOD, TOP OPENING
bore_diameter1.4993 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
carrying_casePROVIDED
hole_diameter0.408 INCHES NOMINAL IN
terminal_typeSCREW SINGLE MATING END SINGLE CONTACT GROUPING
alignment_typeRIGID
shell_materialALUMINUM ALLOY
surface_finishGROUND
NSN3110-00-227-2810
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 50524 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 1.0490 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 2.2500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH1.0490 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
OVERALL OUTSIDE DIAMETER2.2500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
SUBSTITUTES & CROSS-REFERENCES 7
24NBC2036YZP2CReference document
Same NSN cross-reference
Reference document — Secondary reference
24NBC2036YZPANG25Reference document
Same NSN cross-reference
Reference document — Secondary reference
64A98B76-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
24NBC36YZPMILG3278AReference document
Same NSN cross-reference
Reference document — Secondary reference
MS24461-24Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
24NBC2036YZPANG2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 50524?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50524?
50524 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Sandberg.
What parts can replace 50524?
There are 7 known substitutes for 50524: 24NBC2036YZP2C, 24NBC2036YZPANG25, 64A98B76-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50524?
50524 is cataloged in the U.S. Government catalog under NSN 3110-00-227-2810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50524

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.