PartsTable
Technical Data Sheet
Download PDF

50516 — CABLE ASSEMBLY,RADIO FREQUENCY

✓ Government record, cited
Sandberg · TAPERED BEARING
PRODUCT OVERVIEW

50516: CABLE ASSEMBLY,RADIO FREQUENCY.

Stereo to mono adapter. The adapter has a twin male phono jack to single female phono jack configuration. Key specifications include material: STEEL, body_width: 1.625 INCHES NOMINAL IN, lens_color: AMBER SINGLE LIGHT FIRST POSITION HORIZONTAL, point_size: 0.125 INCHES IN, body_height: 2.000 INCHES NOMINAL IN, body_length: 2.500 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-227-2809, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50516
NSN: 3110-00-227-2809
NIINs: 002272809, 003563346, 005238089, 007828198, 008783887, 012536701, 013999399
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL
body_width1.625 INCHES NOMINAL IN
lens_colorAMBER SINGLE LIGHT FIRST POSITION HORIZONTAL
point_size0.125 INCHES IN
body_height2.000 INCHES NOMINAL IN
body_length2.500 INCHES NOMINAL IN
shank_shapeHEXAGON
bore_diameter1.0000 INCHES NOMINAL IN
lens_quantity1
alignment_typeRIGID
inclosure_typeFULLY INCLOSED
overall_length5.125 INCHES NOMINAL IN
NSN3110-00-227-2809
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 50516 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 1.1250 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.7500 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH1.1250 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
OVERALL OUTSIDE DIAMETER1.7500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
SUBSTITUTES & CROSS-REFERENCES 6
AS24461Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
16NBC2028YZPANG25Reference document
Same NSN cross-reference
Reference document — Secondary reference
64A97B38-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS24461-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
16NBC2028YZP2CReference document
Same NSN cross-reference
Reference document — Secondary reference
16NBC2028YZPReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 50516?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50516?
50516 is a CABLE ASSEMBLY,RADIO FREQUENCY manufactured by Sandberg.
What parts can replace 50516?
There are 6 known substitutes for 50516: AS24461, 16NBC2028YZPANG25, 64A97B38-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50516?
50516 is cataloged in the U.S. Government catalog under NSN 3110-00-227-2809. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50516

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.