PartsTable
Technical Data Sheet
Download PDF

505086 — ACTUATOR,MECHANICAL,AIRCRAFT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

505086: ACTUATOR,MECHANICAL,AIRCRAFT.

The ACTUATOR,MECHANICAL,AIRCRAFT is a the manufacturer industrial component. Key specifications include end_item_identification: F-22 RAPTOR, part_name_assigned_by_controlling_agency: REGULATOR COVER RETAINER ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-050-5086, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
505086
NSN: 5315-00-050-5086
NIINs: 000505086, 012985272, 012998769, 014962005, 017107802, 017139483
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
end_item_identificationF-22 RAPTOR
part_name_assigned_by_controlling_agencyREGULATOR COVER RETAINER ASSEMBLY
NSN5315-00-050-5086
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 505086 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.078 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.107 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 3.094 INCHES MINIMUM AND 3.104 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.078 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.107 INCHES NOMINAL IN
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
PIN OVERALL LENGTH3.094 INCHES MINIMUM AND 3.104 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.107 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES2.787 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
5315000505086Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 505086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 505086?
505086 is a ACTUATOR,MECHANICAL,AIRCRAFT.
What parts can replace 505086?
There is 1 known substitute for 505086: 5315000505086. Substitute compatibility should be verified for your specific system.
What is the NSN for 505086?
505086 is cataloged in the U.S. Government catalog under NSN 5315-00-050-5086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 505086

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.