PartsTable
Technical Data Sheet
PartsTable / MRO / 505038
505038 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.453 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.875 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-352-1909, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 505038
NSN: 5315-00-352-1909
FSC: 5315
CAGE: 23705 — FRUEHAUF CORP (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.453 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.875 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.500 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
section_quantity1
special_featuresNUT AND INT TOOTH LOCK WASHER FURNISHED
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
reliability_indicatorNOT ESTABLISHED
NSN5315-00-352-1909
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 505038 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL SAE 1038;ZINC PLATE AND DICHROMATE;HARDNESS ROCKWEL B 93-104;1.800 IN.O/A LG;0.870 IN.HEAD DIA;OPPOSITE END 0.420 IN.DIA;0.500-20 UNF 3A A
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONSTEEL SAE 1038;ZINC PLATE AND DICHROMATE;HARDNESS ROCKWEL B 93-104;1.800 IN.O/A LG;0.870 IN.HEAD DIA;OPPOSITE END 0.420 IN.DIA;0.500-20 UNF 3A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
SMC422657Interchangeable
interchangeable cross-reference
interchangeable
XT11482Interchangeable
interchangeable cross-reference
interchangeable
28355Interchangeable
interchangeable cross-reference
interchangeable
28355VMInterchangeable
interchangeable cross-reference
interchangeable
1841050Interchangeable
interchangeable cross-reference
interchangeable
CVB41S5901-86ALT2PC48Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 505038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 505038?
505038 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 505038?
There are 23 known substitutes for 505038: SMC422657, XT11482, 28355 and 20 more. Substitute compatibility should be verified for your specific system.
Is 505038 still available?
505038 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 505038

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026