PartsTable
Technical Data Sheet
PartsTable / MRO / 50500
50500 ✓ Verified by PartsTable
Braun · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

- „Single-Use-Camera“ with built-in flash<br>- AGFA colour film 24 +3<br>- Film speed ISO 400<br>- Flash ON/OFF switch<br>- Film transport wheel. Key specifications include material: COPPER ALLOY, overall_width: 0.750 INCHES NOMINAL IN, special_features: THREE SLOTS 1.656 IN.; 0.062 IN. THK IN, fsc_application_data: TELETYPE AND FAX EQUIP., supporting_object/surface_attachment_method: TWO 0.089 IN.

THD MTG HOLES IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-051-6791, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50500
NSN: 5325-00-051-6791
FSC: 5325
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY
overall_width0.750 INCHES NOMINAL IN
special_featuresTHREE SLOTS 1.656 IN.; 0.062 IN. THK IN
fsc_application_dataTELETYPE AND FAX EQUIP.
supporting_object/surface_attachment_methodTWO 0.089 IN. THD MTG HOLES IN
NSN5325-00-051-6791
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 50500 · Braun ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TURNLOCK STUD SHANK STYLE: STUD SHANK
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-87115 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SECURING DEVICE TYPE: RING
•
SURFACE TREATMENT: CHROMATE AND ZINC OVERALL
•
DIAMETER: 0.562 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1008 OVERALL
•
MATERIAL ACCOMMODATED THICKNESS: 0.490 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
•
STUD SHANK MAJOR DIAMETER: 0.290 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TURNLOCK STUD SHANK STYLESTUD SHANK
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-87115 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SECURING DEVICE TYPERING
SURFACE TREATMENTCHROMATE AND ZINC OVERALL
DIAMETER0.562 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OVERALL
MATERIAL ACCOMMODATED THICKNESS0.490 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
STUD SHANK MAJOR DIAMETER0.290 INCHES NOMINAL IN
DRIVE TYPESLOTTED
SHANK NECK LENGTH0.605 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
SC-B-69638Interchangeable
interchangeable cross-reference
interchangeable
50500Interchangeable
interchangeable cross-reference
interchangeable
5228003Interchangeable
interchangeable cross-reference
interchangeable
50500-1Interchangeable
interchangeable cross-reference
interchangeable
50500-08Interchangeable
interchangeable cross-reference
interchangeable
3075S2-8DInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50500?
50500 is a COUPLING ASSEMBLY,SELF-SEALING manufactured by Braun. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50500?
There are 22 known substitutes for 50500: SC-B-69638, 50500, 5228003 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50500?
50500 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-051-6791. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50500

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026