PartsTable / COMPONENT / 504952
504952
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.250 INCHES NOMINAL IN, outside_diameter: 3.066 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.061 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-0582, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
504952
NSN: 5330-00-585-0582 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.250 INCHES NOMINAL IN outside_diameter 3.066 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 3.061 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.125 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-585-0582
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 504952
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 3.066 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SEAL WIDTH: 0.250 INCHES NOMINAL IN
• HOUSING BORE DIAMETER: 3.061 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 3.066 INCHES NOMINAL IN MATERIAL STEEL CASE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SEAL WIDTH 0.250 INCHES NOMINAL IN HOUSING BORE DIAMETER 3.061 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 2.125 INCHES NOMINAL IN CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR SURFACE TREATMENT PLASTIC CASE MATERIAL RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
21208 Interchangeable interchangeable cross-reference
interchangeable
0S198SRN12 Interchangeable interchangeable cross-reference
interchangeable
15682 Interchangeable interchangeable cross-reference
interchangeable
1298044 Interchangeable interchangeable cross-reference
interchangeable
530561 Interchangeable interchangeable cross-reference
interchangeable
306HD24 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 504952?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 504952?
504952 is a SEAL,PLAIN ENCASED.
What parts can replace 504952?
There are 11 known substitutes for 504952: 21208, 0S198SRN12, 15682 and 8 more. Substitute compatibility should be verified for your specific system.
Is 504952 still available?
504952 is currently cancelled.