PartsTable
Technical Data Sheet
Download PDF

5048X0PC44 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5048X0PC44: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 0.799 INCHES MINIMUM AND 0.803 INCHES MAXIMUM IN, center_hole_diameter: 0.625 INCHES NOMINAL IN, distance_between_ends: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-171-5048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5048X0PC44
NSN: 5330-00-171-5048
FSC: 5330 — Packing and Gasket Materials
CAGE: 94117 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT RETAINER
peripheral_diameter0.799 INCHES MINIMUM AND 0.803 INCHES MAXIMUM IN
center_hole_diameter0.625 INCHES NOMINAL IN
distance_between_ends0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
cross-sectional_thickness0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-171-5048
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5048X0PC44 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
PERIPHERAL DIAMETER: 0.799 INCHES MINIMUM AND 0.803 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
PERIPHERAL DIAMETER0.799 INCHES MINIMUM AND 0.803 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.625 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-BUTT RETAINER
SUBSTITUTES & CROSS-REFERENCES 8
SR6144-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4903-983016PC26Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10338993Reference document
Same NSN cross-reference
Reference document — Informative reference only
LA405-41110 ITEM 13Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5330001715048Reference document
Same NSN cross-reference
Reference document — Informative reference only
576-2200-1506682REVAPC12Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5048X0PC44?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5048X0PC44?
5048X0PC44 is a RETAINER,PACKING.
What parts can replace 5048X0PC44?
There are 8 known substitutes for 5048X0PC44: SR6144-12, 4903-983016PC26, 10338993 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5048X0PC44?
5048X0PC44 is cataloged in the U.S. Government catalog under NSN 5330-00-171-5048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5048X0PC44

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.