PartsTable
Technical Data Sheet

5047-6 — Technical Data Sheet

✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Allows you to easily and simply extend an audio cable with a large (6.3 mm) jack. This is the type of jack used in most headphones for hi-fi use. The cable has a male connector at one end and a female connector at the other.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-080-0245, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5047-6
NSN: 5330-00-080-0245
FSC: 5330
CAGE: 55207 — ARROW-MASTER, INCORPORATED (USA)
SPECIFICATIONS
materialNICKEL ALLOY
case_styleSQUARE
seal_width0.469 INCHES NOMINAL IN
barrel_length18.0 INCHES NOMINAL IN
overall_length40.000 INCHES NOMINAL IN
special_featuresMONEL
housing_bore_diameter2.441 INCHES NOMINAL IN
sealing_element_styleANGULAR
end_item_identification1.500 IN. NB01025-MAC IN
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-080-0245
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5047-6 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.441 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: LEATHER SEALING ELEMENT
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.469 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.441 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
50376InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
B2CA260-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2046-067InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
BP2480InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
EV4476InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
50518InterchangeableGOVERNMENT REGISTRY
Shotgun,12 Gage,riot Type
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5047-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5047-6?
5047-6 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Sandberg.
What parts can replace 5047-6?
There are 10 known substitutes for 5047-6: 50376, B2CA260-1, 2046-067 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5047-6?
5047-6 is cataloged in the Federal Logistics Information System under NSN 5330-00-080-0245. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5047-6