PartsTable
Technical Data Sheet
Download PDF

504462 — SLEEVE,SEAL,COUPLER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

504462: SLEEVE,SEAL,COUPLER.

The SLEEVE,SEAL,COUPLER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OVERALL, head_style: SPADE, head_height: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, head_length: 0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-769-2328, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
504462
NSN: 5330-00-769-2328
NIINs: 007692328, 009391801, 013645593
FSC: 5330 — Packing and Gasket Materials
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
head_styleSPADE
head_height0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
head_length0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
thread_class3A A
thread_length0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
shoulder_shapeROUND FIRST SHOULDER
fastener_length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
shoulder_length0.158 INCHES MINIMUM AND 0.218 INCHES MAXIMUM FIRST SHOULDER IN
thread_directionRIGHT-HAND
shoulder_diameter0.194 INCHES MINIMUM AND 0.195 INCHES MAXIMUM FIRST SHOULDER IN
NSN5330-00-769-2328
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 504462 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RAISED DIAMETER LENGTH: 1.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPHERICAL INSIDE RECESSED
•
CROSS-SECTIONAL LENGTH: 1.500 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
•
CROSS SECTION INSIDE DIAMETER: 4.620 INCHES NOMINAL IN
•
RECESS LENGTH: 0.938 INCHES NOMINAL IN
•
RECESS DIAMETER: 4.745 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 5.041 INCHES NOMINAL IN
•
MATERIAL: COTTON OR GLASS AND RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
RAISED DIAMETER LENGTH1.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPHERICAL INSIDE RECESSED
CROSS-SECTIONAL LENGTH1.500 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
CROSS SECTION INSIDE DIAMETER4.620 INCHES NOMINAL IN
RECESS LENGTH0.938 INCHES NOMINAL IN
RECESS DIAMETER4.745 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER5.041 INCHES NOMINAL IN
MATERIALCOTTON OR GLASS AND RUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
STSMU0H0462Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
STSMU010H0462Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 504462?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 504462?
504462 is a SLEEVE,SEAL,COUPLER.
What parts can replace 504462?
There are 2 known substitutes for 504462: STSMU0H0462, STSMU010H0462. Substitute compatibility should be verified for your specific system.
What is the NSN for 504462?
504462 is cataloged in the U.S. Government catalog under NSN 5330-00-769-2328. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 504462

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.