PartsTable
Technical Data Sheet
5044-1 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

This optical network cable is used to connect network devices with fibre-optic connectors. The cable uses a 50/125 multi-mode micron optical fibre, which is economical but also gives the cable a long range (used in connection with extension equipment). The cable can be used with the current 100/1000/10000 Mbit Ethernet standards and other network topologies that support ST connectors.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-140-2197, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 5044-1
NSN: 5330-00-140-2197
FSC: 5330
CAGE: 60285 — EATON CORPORATION DBA JACKSON PLANT (USA)
SPECIFICATIONS
materialASBESTOS AND COPPER OVERALL
vial_typeLEVEL BUBBLE
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
body_length0.200 INCHES MAXIMUM IN
design_typeSINGLE FACE
thread_class3A NUT THREAD A
adjustabilityADJUSTABLE
body_diameter0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
terminal_typePIN
thread_length0.875 INCHES MINIMUM STUD THREAD IN
vial_quantity1 CROSS LEVEL
NSN5330-00-140-2197
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5044-1 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
50441Interchangeable
interchangeable cross-reference
interchangeable
YR33Interchangeable
interchangeable cross-reference
interchangeable
X04584Interchangeable
interchangeable cross-reference
interchangeable
97-6Interchangeable
interchangeable cross-reference
interchangeable
25057Interchangeable
interchangeable cross-reference
interchangeable
3954Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5044-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5044-1?
5044-1 is a RESISTOR NETWORK,FIXED,FILM manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5044-1?
There are 18 known substitutes for 5044-1: 50441, YR33, X04584 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5044-1?
5044-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-140-2197. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5044-1