PartsTable
Technical Data Sheet
5043-1 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This optical network cable is used to connect network devices with fibre-optic connectors. The cable uses a 50/125 multi-mode micron optical fibre, which is economical but also gives the cable a long range (used in connection with extension equipment). The cable can be used with the current 100/1000/10000 Mbit Ethernet standards and other network topologies that support SC connectors.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9247, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 5043-1
NSN: 3110-00-108-9247
FSC: 3110
CAGE: 66821 — YALE SECURITY INC. DBA NORTON DOOR CONTROL (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_width1.625 INCHES NOMINAL IN
flow_angle90.0 DEGREES SECOND END
body_height1.312 INCHES NOMINAL IN
body_length0.330 INCHES MAXIMUM IN
temp_rating-50.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
body_diameter0.160 INCHES NOMINAL IN
overall_width24.810 INCHES MAXIMUM IN
exterior_colorBLACK
overall_height16.620 INCHES MAXIMUM IN
NSN3110-00-108-9247
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5043-1 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
12-1874-3-28Interchangeable
interchangeable cross-reference
interchangeable
7-954-9-26Interchangeable
interchangeable cross-reference
interchangeable
101542Interchangeable
interchangeable cross-reference
interchangeable
PA300-281Interchangeable
interchangeable cross-reference
interchangeable
1844Interchangeable
interchangeable cross-reference
interchangeable
VA-305BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5043-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5043-1?
5043-1 is a CAPACITOR,FIXED,CERAMIC DIELECTR manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5043-1?
There are 29 known substitutes for 5043-1: 12-1874-3-28, 7-954-9-26, 101542 and 26 more. Substitute compatibility should be verified for your specific system.
Is 5043-1 still available?
5043-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5043-1