PartsTable
Technical Data Sheet
Download PDF

504129 — DEFLECTOR,DIRT AND LIQUID

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

504129: DEFLECTOR,DIRT AND LIQUID.

The DEFLECTOR,DIRT AND LIQUID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, special_features: COMPOSITION MIL-A-17123 CLASS 2, style_designator: ROUND, GROOVED, end_item_identification: FALK CORP BWSVG-6 TURBINE PUMP. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-527-5963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
504129
NSN: 5310-00-527-5963
NIINs: 005275963, 012308995
FSC: 5310 — Nuts and Washers
CAGE: 02106 — MRL INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
special_featuresCOMPOSITION MIL-A-17123 CLASS 2
style_designatorROUND, GROOVED
end_item_identificationFALK CORP BWSVG-6 TURBINE PUMP
NSN5310-00-527-5963
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 504129 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES ALL SURFACES
•
SHOULDER HEIGHT: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES ALL SURFACES
SHOULDER HEIGHT0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDERED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
MATERIAL THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
SHOULDER DIAMETER0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 4130 OVERALL
HOLE DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
P3163Reference document
Same NSN cross-reference
Reference document — Secondary reference
47-110-249-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310H13-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7052853-00Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
C20469Reference document
Same NSN cross-reference
Reference document — Secondary reference
00661Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 504129?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 504129?
504129 is a DEFLECTOR,DIRT AND LIQUID.
What parts can replace 504129?
There are 6 known substitutes for 504129: P3163, 47-110-249-1, 5310H13-000 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 504129?
504129 is cataloged in the U.S. Government catalog under NSN 5310-00-527-5963. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 504129

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.