PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 504007
504007 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,CONDUIT OUTLET is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 0.500 INCHES NOMINAL IN, body_width: 2.538 INCHES NOMINAL IN, case_style: SQUARE, seal_width: 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, body_height: 3.734 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-8272, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
504007
NSN: 5330-00-285-8272
FSC: 5330
CAGE: 27315 — MORRIS MATERIAL HANDLING, INC. (USA)
SPECIFICATIONS
materialSTEEL
thickness0.500 INCHES NOMINAL IN
body_width2.538 INCHES NOMINAL IN
case_styleSQUARE
seal_width0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
body_height3.734 INCHES NOMINAL IN
body_length3.625 INCHES NOMINAL IN
constructionPERMANENT MAGNET
bore_diameter0.6250 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
outside_diameter1.125 INCHES NOMINAL IN
NSN5330-00-285-8272
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 504007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.250 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
SEAL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
425578Interchangeable
interchangeable cross-reference
interchangeable
JR-048Interchangeable
interchangeable cross-reference
interchangeable
677-1323-000Interchangeable
interchangeable cross-reference
interchangeable
32304991Interchangeable
interchangeable cross-reference
interchangeable
011761Interchangeable
interchangeable cross-reference
interchangeable
632277-459Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 504007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 504007?
504007 is a COVER,CONDUIT OUTLET.
What parts can replace 504007?
There are 28 known substitutes for 504007: 425578, JR-048, 677-1323-000 and 25 more. Substitute compatibility should be verified for your specific system.
Is 504007 still available?
504007 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 504007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026