PartsTable
Technical Data Sheet
Download PDF

50400-6 — JACK,TIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

50400-6: JACK,TIP.

The JACK,TIP is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY TERMINAL, body_style: THREADED BUSHING MOUNTED, seal_width: 0.312 INCHES NOMINAL IN, body_length: 0.703 INCHES NOMINAL IN, construction: SOLID, thread_class: 2A A. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-352-5621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50400-6
NSN: 5330-00-352-5621
NIINs: 003525621, 005354213, 008720698
FSC: 5330 — Packing and Gasket Materials
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
materialCOPPER ALLOY TERMINAL
body_styleTHREADED BUSHING MOUNTED
seal_width0.312 INCHES NOMINAL IN
body_length0.703 INCHES NOMINAL IN
constructionSOLID
thread_class2A A
terminal_typePIN
overall_length0.922 INCHES NOMINAL IN
overall_diameter0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND
precious_materialSILVER
surface_treatmentSILVER CONTACT
NSN5330-00-352-5621
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50400-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.984 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.312 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.984 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 4
7A032074Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
70465HReference document
Same NSN cross-reference
Reference document — Secondary reference
49509Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
142333HBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 50400-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50400-6?
50400-6 is a JACK,TIP.
What parts can replace 50400-6?
There are 4 known substitutes for 50400-6: 7A032074, 70465H, 49509 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50400-6?
50400-6 is cataloged in the U.S. Government catalog under NSN 5330-00-352-5621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50400-6