PartsTable
Technical Data Sheet
Download PDF

503522 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

503522: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: STEEL COMP 303 OVERALL, fork_depth: 0.219 INCHES NOMINAL IN, angle_height: 0.188 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.128 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-111-6951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
503522
NSN: 5340-01-111-6951
FSC: 5340 — Hardware, Commercial
CAGE: 20284 — AIMTRON SYSTEMS, LLC (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialSTEEL COMP 303 OVERALL
fork_depth0.219 INCHES NOMINAL IN
angle_height0.188 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.128 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
thread_length0.094 INCHES NOMINAL ROD CONNECTION IN
overall_height0.484 INCHES NOMINAL IN
fork_span_width0.281 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionLEFT-HAND ROD CONNECTION
NSN5340-01-111-6951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 503522 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.281 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.102 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE BODY
•
THREAD LENGTH: 0.094 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.484 INCHES NOMINAL IN
FORK SPAN WIDTH0.281 INCHES NOMINAL IN
FORK ARM THICKNESS0.102 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE BODY
THREAD LENGTH0.094 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.500 INCHES NOMINAL IN
ANGLE45.0 DEGREES NOMINAL
THREAD DIRECTIONLEFT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 503522?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 503522?
503522 is a CLEVIS,ROD END.
What is the NSN for 503522?
503522 is cataloged in the U.S. Government catalog under NSN 5340-01-111-6951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 503522

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.