PartsTable
Technical Data Sheet
PartsTable / O-RING / 50334
50334 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

If you need to connect an extra CD drive or perhaps the audio output from your new DVD player to your amplifier, this cable is just the thing. This audio cable is designed to deliver optimum stereo sound, so connect your player to the amplifiers AUX input and experience it for yourself! Two male connectors at each end. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-034-2378, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
50334
NSN: 5331-00-034-2378
FSC: 5331 — O-RING
CAGE: 08302 — PACCAR WINCH INC DBA PACCAR WINCH DIVISION (USA)
SPECIFICATIONS
materialSTEEL
end_styleSHORT TWISTED HOOK BOTH ENDS
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
design_typeCLOSED
hook_radius0.052 INCHES NOMINAL BOTH ENDS IN
load_rating2.00 POUNDS NOMINAL LBS
thread_size5/8IN-18 IN
thread_class3A A
coil_quantity26-1/2
overall_width0.140 INCHES IN
thread_length0.344 INCHES NOMINAL IN
NSN5331-00-034-2378
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50334 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TYPICAL APPLICATIONS
  • Server thermal management and cooling
  • Hot-swap fan replacement in production environments
  • Redundant cooling for high-availability systems
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
65X910Interchangeable
interchangeable cross-reference
interchangeable
51X910Interchangeable
interchangeable cross-reference
interchangeable
00044Interchangeable
interchangeable cross-reference
interchangeable
5033-4Interchangeable
interchangeable cross-reference
interchangeable
127W/-260HInterchangeable
interchangeable cross-reference
interchangeable
10015372Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50334?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50334?
50334 is a PUMP,COOLING SYSTEM,ENGINE manufactured by Sandberg.
What parts can replace 50334?
There are 19 known substitutes for 50334: 65X910, 51X910, 00044 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50334?
50334 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-034-2378. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50334

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026