PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5031980-001
5031980-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 35.750 INCHES MINIMUM AND 36.250 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q, special_features: ADHESIVE BACKING, fabrication_method: CELLULAR, UNEXPLODED, cross-sectional_width: 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, cross-sectional_height: 0.563 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-210-2968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5031980-001
NSN: 5330-01-210-2968
FSC: 5330
CAGE: 57946 — US ARMY COMBAT SURVEILLANCE AND TARGET ACQUISITION LABORATORY (USA)
SPECIFICATIONS
length35.750 INCHES MINIMUM AND 36.250 INCHES MAXIMUM IN
materialRUBBER SILICONE CLASS Q
special_featuresADHESIVE BACKING
fabrication_methodCELLULAR, UNEXPLODED
cross-sectional_width0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
cross-sectional_height0.563 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_data1/8 THICKNESS AND 5/8 WIDTH AND 36 LENGTH
material_document_and_classificationMIL-R-46089, GRADE M MIL SPEC SINGLE MATERIAL RESPONSE
NSN5330-01-210-2968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5031980-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 35.750 INCHES MINIMUM AND 36.250 INCHES MAXIMUM IN
•
CROSS-SECTIONAL WIDTH: 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.563 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-46089, GRADE M MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER SILICONE CLASS Q
•
NONDEFINITIVE SPEC/STD DATA: 1/8 THICKNESS AND 5/8 WIDTH AND 36 LENGTH
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH35.750 INCHES MINIMUM AND 36.250 INCHES MAXIMUM IN
CROSS-SECTIONAL WIDTH0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
SPECIAL FEATURESADHESIVE BACKING
CROSS-SECTIONAL HEIGHT0.563 INCHES MINIMUM AND 0.687 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-46089, GRADE M MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALRUBBER SILICONE CLASS Q
NONDEFINITIVE SPEC/STD DATA1/8 THICKNESS AND 5/8 WIDTH AND 36 LENGTH
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
FABRICATION METHODCELLULAR, UNEXPLODED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
R-10470Interchangeable
interchangeable cross-reference
interchangeable
10150401Interchangeable
interchangeable cross-reference
interchangeable
48-00091-5Interchangeable
interchangeable cross-reference
interchangeable
AMS 3196Interchangeable
interchangeable cross-reference
interchangeable
R10470-MED-PSA1Interchangeable
interchangeable cross-reference
interchangeable
8962299-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5031980-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5031980-001?
5031980-001 is a RUBBER STRIP.
What parts can replace 5031980-001?
There are 10 known substitutes for 5031980-001: R-10470, 10150401, 48-00091-5 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5031980-001?
5031980-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-210-2968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5031980-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026