PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5030125
5030125 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, ring_style: CONCENTRIC, body_height: 0.185 INCHES NOMINAL IN, body_length: 0.840 INCHES MAXIMUM IN, inside_diameter: 1.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-812-7833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5030125
NSN: 5330-00-812-7833
FSC: 5330
CAGE: 60285 — EATON CORPORATION DBA JACKSON PLANT (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
ring_styleCONCENTRIC
body_height0.185 INCHES NOMINAL IN
body_length0.840 INCHES MAXIMUM IN
inside_diameter1.250 INCHES NOMINAL IN
outside_diameter1.626 INCHES NOMINAL IN
special_featuresCABLE HYDRAULIC CONTROLLER MOTION
features_providedHERMETICALLY SEALED AND PRESETTABLE AND RETRIGGERABLE
output_logic_formCOMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC
inclosure_materialCERAMIC AND GLASS
material_thickness0.281 INCHES NOMINAL IN
NSN5330-00-812-7833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5030125 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: UNABLE TO DECODE
•
RING STYLE: CONCENTRIC
•
OUTER EDGE THICKNESS: 0.188 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.626 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALUNABLE TO DECODE
RING STYLECONCENTRIC
OUTER EDGE THICKNESS0.188 INCHES NOMINAL IN
OUTSIDE DIAMETER1.626 INCHES NOMINAL IN
INSIDE DIAMETER1.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.281 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
11200014-1Interchangeable
interchangeable cross-reference
interchangeable
14538B/BEAJCInterchangeable
interchangeable cross-reference
interchangeable
SCL4538BInterchangeable
interchangeable cross-reference
interchangeable
5030125Interchangeable
interchangeable cross-reference
interchangeable
5030-1.25Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5030125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5030125?
5030125 is a MICROCIRCUIT,DIGITAL.
What parts can replace 5030125?
There are 5 known substitutes for 5030125: 11200014-1, 14538B/BEAJC, SCL4538B and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5030125?
5030125 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-812-7833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5030125

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026