PartsTable
Technical Data Sheet
PartsTable / MRO / 5030-1
5030-1 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

External 68-pin Ultra SCSI 160M terminator. The terminator is suitable for LVD SCSI controllers. The terminator is active, so it automatically regulates the termination resistance at the correct level.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-270-8810, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5030-1
NSN: 5310-00-270-8810
FSC: 5310
CAGE: 26344 — NEW HAVEN MFG CORP (USA)
SPECIFICATIONS
special_featuresNOMENCLATURE VHF-FM DESKTOP BASE STATION; TI 6600.15, VOL 1, INSTRUCTION BOOK, NRCS, VHF-FM DIGITAL, PG 5-5
end_item_identificationVERY HIGH FREQUENCY FM (VHF FM)
NSN5310-00-270-8810
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5030-1 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE TYPE: CHAMFERED
•
THREAD SERIES: UNF
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
WIDTH ACROSS FLATS: 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE TYPECHAMFERED
THREAD SERIESUNF
THREAD QUANTITY PER INCH32
NOMINAL THREAD SIZE0.190 INCHES IN
WIDTH ACROSS FLATS0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL CORROSION RESISTING OVERALL
SPECIFICATION/STANDARD DATA81348-FF-N-836 GOVERNMENT SPECIFICATION
NUT STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
5330-238000Interchangeable
interchangeable cross-reference
interchangeable
C115Interchangeable
interchangeable cross-reference
interchangeable
50301Interchangeable
interchangeable cross-reference
interchangeable
SC-B-69782Interchangeable
interchangeable cross-reference
interchangeable
6150-008-PTInterchangeable
interchangeable cross-reference
interchangeable
5-030Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5030-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5030-1?
5030-1 is a BASE STATION,RADIO SET manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5030-1?
There are 21 known substitutes for 5030-1: 5330-238000, C115, 50301 and 18 more. Substitute compatibility should be verified for your specific system.
Is 5030-1 still available?
5030-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5030-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026