PartsTable
Technical Data Sheet
Download PDF

5022500 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

5022500: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, body_style: RECTANGULAR, body_width: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, body_height: 0.397 INCHES MINIMUM AND 0.413 INCHES MAXIMUM IN, body_length: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-425-4214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5022500
NSN: 5330-00-425-4214
NIINs: 004254214, 011732792
FSC: 5330 — Packing and Gasket Materials
CAGE: 09348 — LUCAS WESTERN INC (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
body_styleRECTANGULAR
body_width0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
body_height0.397 INCHES MINIMUM AND 0.413 INCHES MAXIMUM IN
body_length0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeSLEEVE SHAFT
shaft_length0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
cubic_measure0.031 CUBIC INCHES
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
shaft_diameter0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
NSN5330-00-425-4214
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5022500 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 8.000 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.562 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
BOLT CIRCLE DIAMETER: 6.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.010 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER8.000 INCHES NOMINAL IN
APERTURE DIAMETER5.562 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
BOLT CIRCLE DIAMETER6.750 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
50707428Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
1X13011Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5022500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5022500?
5022500 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5022500?
There are 2 known substitutes for 5022500: 50707428, 1X13011. Substitute compatibility should be verified for your specific system.
What is the NSN for 5022500?
5022500 is cataloged in the U.S. Government catalog under NSN 5330-00-425-4214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5022500

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.