PartsTable
Technical Data Sheet
Download PDF

502119 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
Jabra · NUT WASHER
PRODUCT OVERVIEW

502119: PIN,STRAIGHT,HEADLESS.

Detachable control unit with SMART ringer and programmable buttons for easier call handling. Key specifications include material: STEEL OVERALL, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS, features_provided: CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-753-9735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
502119
NSN: 5315-00-753-9735
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
hardness_rating58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
features_providedCASEHARDENED
pin_overall_length2.990 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN
pin_overall_diameter1.0001 INCHES MINIMUM AND 1.0003 INCHES MAXIMUM IN
first_end_taper_angle3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
first_end_taper_length0.125 INCHES NOMINAL IN
second_end_corner_radius0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-753-9735
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 502119 · Jabra ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 1.0001 INCHES MINIMUM AND 1.0003 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.990 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.125 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
HARDNESS RATING58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER1.0001 INCHES MINIMUM AND 1.0003 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.990 INCHES MINIMUM AND 3.005 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FEATURES PROVIDEDCASEHARDENED
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315007539735Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 502119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 502119?
502119 is a PIN,STRAIGHT,HEADLESS manufactured by Jabra.
What parts can replace 502119?
There is 1 known substitute for 502119: 5315007539735. Substitute compatibility should be verified for your specific system.
What is the NSN for 502119?
502119 is cataloged in the U.S. Government catalog under NSN 5315-00-753-9735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 502119

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.