PartsTable
Technical Data Sheet
Download PDF

502108 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

502108: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.344 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, overall_width: 1.125 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ENAMEL BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-281-5427, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
502108
NSN: 5340-00-281-5427
NIINs: 002815427, 014740835
FSC: 5340 — Hardware, Commercial
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
diameter0.344 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
overall_width1.125 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentENAMEL BAND
material_thickness0.120 INCHES NOMINAL IN
loop_inside_diameter1.781 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.438 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.031 INCHES NOMINAL IN
NSN5340-00-281-5427
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 502108 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.344 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.120 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.438 INCHES NOMINAL IN
•
SURFACE TREATMENT: ENAMEL BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER0.344 INCHES NOMINAL IN
OVERALL WIDTH1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.120 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.438 INCHES NOMINAL IN
SURFACE TREATMENTENAMEL BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.031 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 7
1200962H91Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
103274HXReference document
Same NSN cross-reference
Reference document — Secondary reference
10A3496Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
L35657Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7351018Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6011E9104Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 502108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 502108?
502108 is a CLAMP,LOOP.
What parts can replace 502108?
There are 7 known substitutes for 502108: 1200962H91, 103274HX, 10A3496 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 502108?
502108 is cataloged in the U.S. Government catalog under NSN 5340-00-281-5427. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 502108

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.