PartsTable
Technical Data Sheet
Download PDF

502097J — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

502097J: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.6405 INCHES MINIMUM AND 0.6407 INCHES MAXIMUM IN, material: STEEL COMP 8615 OR STEEL COMP 8617 OR STEEL COMP 8620 OVERALL, overall_length: 1.370 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN, undercut_width: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, first_end_style: CHAMFERED, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-753-9174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
502097J
NSN: 5315-00-753-9174
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
diameter0.6405 INCHES MINIMUM AND 0.6407 INCHES MAXIMUM IN
materialSTEEL COMP 8615 OR STEEL COMP 8617 OR STEEL COMP 8620 OVERALL
overall_length1.370 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
undercut_width0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
first_end_styleCHAMFERED
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
undercut_radius0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
effective_length0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM IN
style_designatorGROOVE
features_providedCASEHARDENED
undercut_diameter0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
NSN5315-00-753-9174
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 502097J · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: GROOVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORGROOVE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.6405 INCHES MINIMUM AND 0.6407 INCHES MAXIMUM IN
OVERALL LENGTH1.370 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 502097J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 502097J?
502097J is a PIN,GROOVED,HEADLESS.
What is the NSN for 502097J?
502097J is cataloged in the U.S. Government catalog under NSN 5315-00-753-9174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 502097J

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.