PartsTable
Technical Data Sheet
PartsTable / MRO / 502-4-1
502-4-1 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

This box allows you to connect up to four monitors to a single VGA output without signal loss. Ideal for use in demonstrations, teaching, etc. Max.

resolution: 1200 x 1600. Power supply included. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-065-0041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 502-4-1
NSN: 3110-00-065-0041
FSC: 3110
CAGE: 07484 — ACCURATE BUSHING COMPANY, INC. (USA)
SPECIFICATIONS
Part Number502-4-1
ManufacturerSandberg
NSN3110-00-065-0041
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 502-4-1 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
OUTER RING WIDTH: 0.2810 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.3750 INCHES NOMINAL IN
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
MATERIALSTEEL OVERALL
OUTER RING WIDTH0.2810 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.8750 INCHES NOMINAL IN
INNER RING WIDTH0.3750 INCHES NOMINAL IN
BORE DIAMETER0.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
0863461-00Interchangeable
interchangeable cross-reference
interchangeable
50023Interchangeable
interchangeable cross-reference
interchangeable
5036268-00Interchangeable
interchangeable cross-reference
interchangeable
59663T1Interchangeable
interchangeable cross-reference
interchangeable
50241Interchangeable
interchangeable cross-reference
interchangeable
6356Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 502-4-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 502-4-1?
502-4-1 is a BEARING,ROLLER,NEEDLE manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 502-4-1?
There are 22 known substitutes for 502-4-1: 0863461-00, 50023, 5036268-00 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 502-4-1?
502-4-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-065-0041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 502-4-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026