PartsTable
Technical Data Sheet
PartsTable / MRO / 502-150
502-150 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include width: 0.570 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN, height: 0.140 INCHES NOMINAL IN, length: 0.380 INCHES NOMINAL IN, material: STEEL, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_length: 0.460 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-527-7851, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 502-150
NSN: 5330-00-527-7851
FSC: 5330
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
width0.570 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
height0.140 INCHES NOMINAL IN
length0.380 INCHES NOMINAL IN
materialSTEEL
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.460 INCHES MAXIMUM IN
body_diameter0.240 INCHES MAXIMUM IN
hole_diameter0.113 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
recess_length0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
recess_diameter1.562 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE
NSN5330-00-527-7851
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 502-150 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RECESS LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL LENGTH: 1.500 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
•
CROSS SECTION INSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
RECESS DIAMETER: 1.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPHERICAL INSIDE RECESSED
•
CROSS SECTION OUTSIDE DIAMETER: 1.906 INCHES NOMINAL IN
•
RAISED DIAMETER LENGTH: 1.094 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
RECESS LENGTH0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL LENGTH1.500 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
CROSS SECTION INSIDE DIAMETER1.500 INCHES NOMINAL IN
RECESS DIAMETER1.562 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPHERICAL INSIDE RECESSED
CROSS SECTION OUTSIDE DIAMETER1.906 INCHES NOMINAL IN
RAISED DIAMETER LENGTH1.094 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
NP0A22P0RM2-2UUFInterchangeable
interchangeable cross-reference
interchangeable
03167410Interchangeable
interchangeable cross-reference
interchangeable
301-000C0G0220KInterchangeable
interchangeable cross-reference
interchangeable
502150Interchangeable
interchangeable cross-reference
interchangeable
11438978Interchangeable
interchangeable cross-reference
interchangeable
17B9E3023-571Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 502-150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 502-150?
502-150 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 502-150?
There are 6 known substitutes for 502-150: NP0A22P0RM2-2UUF, 03167410, 301-000C0G0220K and 3 more. Substitute compatibility should be verified for your specific system.
Is 502-150 still available?
502-150 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 502-150

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026