PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 502 1-2IN
502 1-2IN ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: BRONZE OVERALL, bonnet_type: INSIDE SCREW, connection_type: THREADED INTERNAL PIPE ALL ENDS, connection_style: PLAIN,OPTIONAL END(PIPE) ALL ENDS, style_designator: STRAIGHT THRU, thread_direction: RIGHT-HAND ALL ENDS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-235-4080, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
502 1-2IN
NSN: 4730-00-235-4080
FSC: 4730
CAGE: 78824 — TUBE TURNS TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialBRONZE OVERALL
bonnet_typeINSIDE SCREW
connection_typeTHREADED INTERNAL PIPE ALL ENDS
connection_stylePLAIN,OPTIONAL END(PIPE) ALL ENDS
style_designatorSTRAIGHT THRU
thread_directionRIGHT-HAND ALL ENDS
operating_pressure125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceDISK
nominal_thread_size0.500 INCHES ALL ENDS IN
valve_operation_methodMANUAL
bonnet_attachment_methodTHREADED
thread_series_designatorNPT ALL ENDS
NSN4730-00-235-4080
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 502 1-2IN · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 7.000 INCHES NOMINAL IN
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 500.0 FAHRENHEIT STEAM DEGF
•
OPERATING PRESSURE AND TYPE: 150.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
•
MATERIAL: STEEL
•
NONDEFINITIVE SPEC/STD DATA: C STYLE AND 1C TYPE
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
•
SPECIFICATION/STANDARD DATA: 81349-MIL-F-18180 GOVERNMENT SPECIFICATION
•
FLANGE SECTION STYLE: RAISED FACE, RAISED NECK
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE DIAMETER7.000 INCHES NOMINAL IN
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED500.0 FAHRENHEIT STEAM DEGF
OPERATING PRESSURE AND TYPE150.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
MATERIALSTEEL
NONDEFINITIVE SPEC/STD DATAC STYLE AND 1C TYPE
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
SPECIFICATION/STANDARD DATA81349-MIL-F-18180 GOVERNMENT SPECIFICATION
FLANGE SECTION STYLERAISED FACE, RAISED NECK
BOLT HOLE DIAMETER0.750 INCHES NOMINAL IN
NECK HEIGHT0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
16-11-2Interchangeable
interchangeable cross-reference
interchangeable
2500-6-174Interchangeable
interchangeable cross-reference
interchangeable
50221Interchangeable
interchangeable cross-reference
interchangeable
16212Interchangeable
interchangeable cross-reference
interchangeable
N2131PC27Interchangeable
interchangeable cross-reference
interchangeable
13E1F103JInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 502 1-2IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 502 1-2IN?
502 1-2IN is a CAPACITOR,FIXED,PLASTIC DIELECTR.
What parts can replace 502 1-2IN?
There are 18 known substitutes for 502 1-2IN: 16-11-2, 2500-6-174, 50221 and 15 more. Substitute compatibility should be verified for your specific system.
Is 502 1-2IN still available?
502 1-2IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 502 1-2IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026