PartsTable
Technical Data Sheet
5018-2 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

This switch box allows you to control two computers from one keyboard, monitor and mouse set or to operate the same computer from two keyboard, monitor and mouse sets. You switch manually between the two consoles. The switch box has connectors for PS/2 mice and keyboards as well as VGA monitors.

All connectors on the box are female. The VGA connectors require ordinary monitor cables, and for PS/2 you need switch box cables. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-004-2213, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 5018-2
NSN: 5310-00-004-2213
FSC: 5310
CAGE: 82340 — L3HARRIS TECHNOLOGIES, INC. DIV SPACE AND AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
base_styleSINGLE CONTACT BAYONET CANDELABRA
body_width0.950 INCHES MAXIMUM IN
body_height0.880 INCHES MAXIMUM IN
body_length1.690 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
voltage_rating12.000 VOLTS NOMINAL
flashtube_styleHORIZONTAL HELIX WITH OUTER BULB
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
frequency_rating400.0 HERTZ NOMINAL SINGLE COMPONENT
special_featuresCOLOR: RED
voltage_in_volts600.0
NSN5310-00-004-2213
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5018-2 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
43941Interchangeable
interchangeable cross-reference
interchangeable
254619146-272Interchangeable
interchangeable cross-reference
interchangeable
PEI8574Interchangeable
interchangeable cross-reference
interchangeable
50182Interchangeable
interchangeable cross-reference
interchangeable
D50182Interchangeable
interchangeable cross-reference
interchangeable
YHO125Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5018-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5018-2?
5018-2 is a TELETYPEWRITER SUBASSEMBLY manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5018-2?
There are 15 known substitutes for 5018-2: 43941, 254619146-272, PEI8574 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5018-2?
5018-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-004-2213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5018-2