PartsTable
Technical Data Sheet
Download PDF

50151 — BOOT,DUST AND MOISTURE SEAL

✓ Government record, cited
InLine · MRO · MRO_GENERAL
PRODUCT OVERVIEW

50151: BOOT,DUST AND MOISTURE SEAL.

Use this cable to connect Wake on LAN (WOL) network card with mainboard. - Cable length: ca. 30cm - 3 pin connector.

Key specifications include end_item_identification: F-22. This part is cataloged in the U.S. Government catalog under NSN 5315-00-096-7415, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50151
NSN: 5315-00-096-7415
NIINs: 000967415, 001750091, 001848199, 003010845, 003508313, 004740492, 006896786, 007619780, 009225090, 009318084, 009362993, 009499005, 009810151, 011361555, 011784285, 012547282, 013866101, 014375385, 014739583, 014872440, 017080879
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
end_item_identificationF-22
NSN5315-00-096-7415
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 50151 · InLine ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.188 INCHES NOMINAL IN
•
SECOND SHANK DIAMETER: 0.188 INCHES NOMINAL IN
•
SURFACE FINISH: 16.0 MICROINCHES LARGE SHANK
•
UNDERCUT WIDTH: 0.046 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.150 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
FIRST END LOCATION: SHANK END
•
THREAD LENGTH: 0.267 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.188 INCHES NOMINAL IN
SECOND SHANK DIAMETER0.188 INCHES NOMINAL IN
SURFACE FINISH16.0 MICROINCHES LARGE SHANK
UNDERCUT WIDTH0.046 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
UNDERCUT DIAMETER0.150 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
FIRST END LOCATIONSHANK END
THREAD LENGTH0.267 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH0.313 INCHES MINIMUM AND 0.813 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 50151?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50151?
50151 is a BOOT,DUST AND MOISTURE SEAL manufactured by InLine. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 50151?
50151 is cataloged in the U.S. Government catalog under NSN 5315-00-096-7415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50151

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.