PartsTable
Technical Data Sheet
PartsTable / MRO / 5015-11
5015-11 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include radius: 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN, body_width: 1.438 INCHES NOMINAL IN, head_style: KNURLED NO. 1, body_height: 2.120 INCHES NOMINAL IN, body_length: 2.844 INCHES NOMINAL IN, head_height: 0.250 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-1511, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 5015-11
NSN: 5340-00-050-1511
FSC: 5340
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
radius0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
body_width1.438 INCHES NOMINAL IN
head_styleKNURLED NO. 1
body_height2.120 INCHES NOMINAL IN
body_length2.844 INCHES NOMINAL IN
head_height0.250 INCHES NOMINAL IN
thread_class2A A
head_diameter0.438 INCHES NOMINAL IN
thread_length0.375 INCHES MINIMUM IN
inclosure_typeHERMETICALLY SEALED
overall_height0.516 INCHES NOMINAL IN
connection_typeTHREADED INTERNAL TUBE SECOND END
NSN5340-00-050-1511
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5015-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE
•
MATERIAL THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4003, COMP 1100, TEMPER H14 ASSN STD SINGLE MATERIAL RESPONSE
•
STYLE DESIGNATOR: CONCAVE
•
OUTSIDE DIAMETER: 0.497 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
•
RADIUS: 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE
MATERIAL THICKNESS0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4003, COMP 1100, TEMPER H14 ASSN STD SINGLE MATERIAL RESPONSE
STYLE DESIGNATORCONCAVE
OUTSIDE DIAMETER0.497 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
RADIUS0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
MS9380-14Interchangeable
interchangeable cross-reference
interchangeable
AS9380Interchangeable
interchangeable cross-reference
interchangeable
5340001774013Interchangeable
interchangeable cross-reference
interchangeable
501522Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9380Interchangeable
interchangeable cross-reference
interchangeable
MS9380-17Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5015-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5015-11?
5015-11 is a HOSE ASSEMBLY,NONMETALLIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 5015-11?
There are 29 known substitutes for 5015-11: MS9380-14, AS9380, 5340001774013 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5015-11?
5015-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-1511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5015-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026