PartsTable / O-RING / 501460
501460
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.250 INCHES NOMINAL IN, length: 0.780 INCHES NOMINAL IN, material: STEEL OVERALL, overall_height: 0.926 INCHES NOMINAL IN, special_features: HOLES TWO 0.127 IN. DIA TO 0.131 IN.
DIA IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-350-9013, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
501460
NSN: 5331-00-350-9013 FSC: 5331 — O-RINGCAGE: D5589 — FEINMECHANISCHE WERKE MAINZ GMBH (DEU)
SPECIFICATIONS
width 1.250 INCHES NOMINAL IN length 0.780 INCHES NOMINAL IN material STEEL OVERALL overall_height 0.926 INCHES NOMINAL IN special_features HOLES TWO 0.127 IN. DIA TO 0.131 IN. DIA IN surface_treatment CADMIUM AND CHROMATE OVERALL material_thickness 0.015 INCHES MINIMUM AND 0.018 INCHES MAXIMUM IN loop/holding_dimension 0.745 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN distance_from_loop_center_to_end 0.516 INCHES NOMINAL IN material_document_and_classification MIL-S-17919,TYPE 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL surface_treatment_document_and_classification QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL NSN 5331-00-350-9013
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 501460
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
• TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM
• CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN TEMP RATING -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF MATERIAL DOCUMENT AND CLASSIFICATION MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR HARDNESS RATING 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM CENTER HOLE DIAMETER 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
D54158 Interchangeable interchangeable cross-reference
interchangeable
252739R1 Interchangeable interchangeable cross-reference
interchangeable
54158 Interchangeable interchangeable cross-reference
interchangeable
16117 Interchangeable interchangeable cross-reference
interchangeable
26946 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 501460?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 501460?
501460 is a CLIP,SPRING TENSION.
What parts can replace 501460?
There are 30 known substitutes for 501460: D54158, 252739R1, 54158 and 27 more. Substitute compatibility should be verified for your specific system.
Is 501460 still available?
501460 is currently cancelled.