PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5014-100
5014-100 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY HANDLE, overall_width: 3.750 INCHES NOMINAL IN, overall_length: 6.380 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), special_features: HANDLE IS SPRING LOADED TO RETURNTO STOWED POSITION, style_designator: RECTANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-374-0392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5014-100
NSN: 5340-01-374-0392
FSC: 5340
CAGE: 82340 — L3HARRIS TECHNOLOGIES, INC. DIV SPACE AND AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY HANDLE
overall_width3.750 INCHES NOMINAL IN
overall_length6.380 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresHANDLE IS SPRING LOADED TO RETURNTO STOWED POSITION
style_designatorRECTANGULAR
end_item_identificationC-17A AIRCRAFT A
mounting_facility_diameter0.193 INCHES NOMINAL IN
mounting_facility_quantity4
part_name_assigned_by_controlling_agencyHANDLE,LIFT
center_to_center_distance_between_mounting_facilities_parallel_to_width3.190 INCHES NOMINAL IN
center_to_center_distance_between_mounting_facilities_parallel_to_length5.820 INCHES NOMINAL IN
NSN5340-01-374-0392
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5014-100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE QUANTITY: 2
•
LOOP/HOLDING DIMENSION: 1.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
WIDTH: 0.625 INCHES NOMINAL IN
•
MOUNTING FACILITY DIAMETER: 0.144 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
MOUNTING METHOD: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS (FLIS)
HOLE QUANTITY2
LOOP/HOLDING DIMENSION1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
OVERALL HEIGHT1.325 INCHES NOMINAL IN
WIDTH0.625 INCHES NOMINAL IN
MOUNTING FACILITY DIAMETER0.144 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
MOUNTING METHODUNTHREADED HOLE(S)
LENGTH1.160 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.721 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5014-100Upgraded Successor
successor cross-reference
successor
60216Interchangeable
interchangeable cross-reference
interchangeable
AA27016Interchangeable
interchangeable cross-reference
interchangeable
355-11-16-001Interchangeable
interchangeable cross-reference
interchangeable
602-GP-16Interchangeable
interchangeable cross-reference
interchangeable
K54J584P2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5014-100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5014-100?
5014-100 is a CLIP,SPRING TENSION.
What parts can replace 5014-100?
There are 15 known substitutes for 5014-100: 5014-100, 60216, AA27016 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5014-100?
5014-100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-374-0392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5014-100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026