PartsTable
Technical Data Sheet
Download PDF

50138-1048 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

50138-1048: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include rising_pin: NOT INCLUDED, knuckle_type: FRICTION, pin_diameter: 0.118 INCHES NOMINAL IN, overall_length: 17.440 INCHES NOMINAL IN, performance_type: NOT RATED, pin_removability: REMOVABLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-223-0382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50138-1048
NSN: 5340-00-223-0382
FSC: 5340 — Hardware, Commercial
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
rising_pinNOT INCLUDED
knuckle_typeFRICTION
pin_diameter0.118 INCHES NOMINAL IN
overall_length17.440 INCHES NOMINAL IN
performance_typeNOT RATED
pin_removabilityREMOVABLE
style_designatorBUTT
surface_treatmentUNABLE TO DECODE
material_thickness0.040 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.096 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
NSN5340-00-223-0382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50138-1048 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.118 INCHES NOMINAL IN
•
MOUNTING HOLE QUANTITY: 18
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.096 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
PIN CENTER TO BODY EDGE DISTANCE: 0.750 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.118 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY18
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.096 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
OVERALL LENGTH17.440 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.750 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
PIN REMOVABILITYREMOVABLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
50138-1048H01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 50138-1048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50138-1048?
50138-1048 is a HINGE,BUTT.
What parts can replace 50138-1048?
There is 1 known substitute for 50138-1048: 50138-1048H01. Substitute compatibility should be verified for your specific system.
What is the NSN for 50138-1048?
50138-1048 is cataloged in the U.S. Government catalog under NSN 5340-00-223-0382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50138-1048