PartsTable / COMPONENT / 50135S36
50135S36
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, surface_treatment: PASSIVATE CASE, housing_bore_diameter: 1.250 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-722-2454, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
50135S36
NSN: 5330-00-722-2454 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.375 INCHES NOMINAL IN surface_treatment PASSIVATE CASE housing_bore_diameter 1.250 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.3750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-722-2454
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 50135S36
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 0.3750 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
• SEAL WIDTH: 0.375 INCHES NOMINAL IN
• SURFACE TREATMENT: PASSIVATE CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 0.3750 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CORROSION RESISTING CASE HOUSING BORE DIAMETER 1.250 INCHES NOMINAL IN SEAL WIDTH 0.375 INCHES NOMINAL IN SURFACE TREATMENT PASSIVATE CASE CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
AC1914E6 Interchangeable interchangeable cross-reference
interchangeable
62814 Interchangeable interchangeable cross-reference
interchangeable
05-1820 Interchangeable interchangeable cross-reference
interchangeable
7610NCM051682 Interchangeable interchangeable cross-reference
interchangeable
62410 Interchangeable interchangeable cross-reference
interchangeable
50010L Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 50135S36?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50135S36?
50135S36 is a SEAL,PLAIN ENCASED.
What parts can replace 50135S36?
There are 7 known substitutes for 50135S36: AC1914E6, 62814, 05-1820 and 4 more. Substitute compatibility should be verified for your specific system.
Is 50135S36 still available?
50135S36 is currently cancelled.
Request a Quote — 50135S36