PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 50129-2
50129-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ANGLE,TILT BASE SEAT is a the manufacturer industrial component. Key specifications include orifice_diameter: 0.250 INCHES NOMINAL IN, end_item_identification: SANDBLASTING HOSE, part_name_assigned_by_controlling_agency: DI-CARB NOZZLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-989-2223, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
50129-2
NSN: 5330-00-989-2223
FSC: 5330
CAGE: 72429 — MISSION SYSTEMS DAVENPORT INC. (USA)
SPECIFICATIONS
orifice_diameter0.250 INCHES NOMINAL IN
end_item_identificationSANDBLASTING HOSE
part_name_assigned_by_controlling_agencyDI-CARB NOZZLE
NSN5330-00-989-2223
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50129-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
CONSTRUCTION: ONE-PIECE
•
RETAINER THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.070 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
•
MATERIAL: STEEL RETAINER
•
SURFACE TREATMENT: CADMIUM RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
PACKING INSIDE DIAMETER0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
RETAINER THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.070 INCHES NOMINAL IN
OUTSIDE DIAMETER0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
MATERIALSTEEL RETAINER
MATERIALRUBBER PACKING
SURFACE TREATMENTCADMIUM RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
9100-1664Interchangeable
interchangeable cross-reference
interchangeable
9220-50Interchangeable
interchangeable cross-reference
interchangeable
22-304Interchangeable
interchangeable cross-reference
interchangeable
600-001-1/40.S.Interchangeable
interchangeable cross-reference
interchangeable
502AS2374Interchangeable
interchangeable cross-reference
interchangeable
1560L19-026Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50129-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50129-2?
50129-2 is a ANGLE,TILT BASE SEAT.
What parts can replace 50129-2?
There are 25 known substitutes for 50129-2: 9100-1664, 9220-50, 22-304 and 22 more. Substitute compatibility should be verified for your specific system.
Is 50129-2 still available?
50129-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50129-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026