PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 501267
501267 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,RETAINING is a the manufacturer industrial component. Key specifications include special_features: 7.62 CENTIMETERS HEIGHT, 29.21 CENTIMETERS WIDTH, 20.32 CENTIMETERS LENGTH CM, part_name_assigned_by_controlling_agency: AIRCRAFT FIRST AID KIT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-505-6340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
501267
NSN: 5340-00-505-6340
FSC: 5340
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
special_features7.62 CENTIMETERS HEIGHT, 29.21 CENTIMETERS WIDTH, 20.32 CENTIMETERS LENGTH CM
part_name_assigned_by_controlling_agencyAIRCRAFT FIRST AID KIT
NSN5340-00-505-6340
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 501267 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER TYPE: BUCKLE AND LOOP AND END CLIP LOCATION NOT OTHERWISE SPECIFIED
•
COLOR: OLIVE DRAB
•
LENGTH: 24.000 INCHES NOMINAL IN
•
MATERIAL: STEEL LOOP
•
WIDTH: 1.500 INCHES NOMINAL IN
•
END CLIP QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER TYPEBUCKLE AND LOOP AND END CLIP LOCATION NOT OTHERWISE SPECIFIED
COLOROLIVE DRAB
LENGTH24.000 INCHES NOMINAL IN
MATERIALSTEEL LOOP
MATERIALSTEEL AND IRON MALLEABLE BUCKLE
WIDTH1.500 INCHES NOMINAL IN
MATERIALCOTTON LOCATION NOT OTHERWISE SPECIFIED
END CLIP QUANTITY1
ENVIRONMENTAL PROTECTIONMILDEW RESISTANT
LOOP STYLE DESIGNATORDOUBLE OPENING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
R271NAB0050NN056NNPF1Interchangeable
interchangeable cross-reference
interchangeable
SF11077 ITEM 110Interchangeable
interchangeable cross-reference
interchangeable
399686Interchangeable
interchangeable cross-reference
interchangeable
501267Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 501267?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 501267?
501267 is a RING,RETAINING.
What parts can replace 501267?
There are 4 known substitutes for 501267: R271NAB0050NN056NNPF1, SF11077 ITEM 110, 399686 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 501267?
501267 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-505-6340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 501267

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026