PartsTable / O-RING / 501224
501224
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.865 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN, center_hole_diameter: 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-050-1224, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
501224
NSN: 5331-00-050-1224 FSC: 5331 — O-RINGCAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.865 INCHES MINIMUM AND 0.895 INCHES MAXIMUM IN center_hole_diameter 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-050-1224
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 501224
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1111-5 Interchangeable interchangeable cross-reference
interchangeable
1111 Interchangeable interchangeable cross-reference
interchangeable
113 Interchangeable interchangeable cross-reference
interchangeable
B107.48 Interchangeable interchangeable cross-reference
interchangeable
B107.48 TY1CL2 Interchangeable interchangeable cross-reference
interchangeable
G1-12040 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 501224?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 501224?
501224 is a O-RING.
What parts can replace 501224?
There are 21 known substitutes for 501224: 1111-5, 1111, 113 and 18 more. Substitute compatibility should be verified for your specific system.
Is 501224 still available?
501224 is currently cancelled.