PartsTable
Technical Data Sheet
Download PDF

501052-15-N-MOD — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

501052-15-N-MOD: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: STEEL CORROSION RESISTING, end_item_identification: HOWITZER, LIGHT TOWED, 105MM, M119A1 MM, material_document_and_classification: ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE, part_name_assigned_by_controlling_agency: SERIES IV FEMALE CAP AND LANYARD MODIFICATION ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-616-9500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
501052-15-N-MOD
NSN: 5340-01-616-9500
FSC: 5340 — Hardware, Commercial
CAGE: 7Y943 — ACE ELECTRONICS OF N.J., INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
special_featuresMATERIAL SILICONE GASKET PER A-A-595888; FINISH PASSIVATED PER 11-P-35; ATTACHMENT WIRE ROPE, POLYTETRAFLUOROETHYLENE COAT WITH LENGTH 5.000 NOMINAL INCH
end_item_identificationHOWITZER, LIGHT TOWED, 105MM, M119A1 MM
material_document_and_classificationASTM A276 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencySERIES IV FEMALE CAP AND LANYARD MODIFICATION ASSEMBLY
NSN5340-01-616-9500
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 501052-15-N-MOD MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A276 ASSN STD SINGLE MATERIAL RESPONSE
SPECIAL FEATURESMATERIAL SILICONE GASKET PER A-A-595888; FINISH PASSIVATED PER 11-P-35; ATTACHMENT WIRE ROPE, POLYTETRAFLUOROETHYLENE COAT WITH LENGTH 5.000 NOMINAL INCH
PART NAME ASSIGNED BY CONTROLLING AGENCYSERIES IV FEMALE CAP AND LANYARD MODIFICATION ASSEMBLY
END ITEM IDENTIFICATIONHOWITZER, LIGHT TOWED, 105MM, M119A1 MM
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
13034107Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 501052-15-N-MOD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 501052-15-N-MOD?
501052-15-N-MOD is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 501052-15-N-MOD?
There is 1 known substitute for 501052-15-N-MOD: 13034107. Substitute compatibility should be verified for your specific system.
What is the NSN for 501052-15-N-MOD?
501052-15-N-MOD is cataloged in the U.S. Government catalog under NSN 5340-01-616-9500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 501052-15-N-MOD