PartsTable
Technical Data Sheet
Download PDF

50104 — STARTER,ENGINE,ELECTRICAL

✓ Government record, cited
Sandberg · MRO · MRO_GENERAL
PRODUCT OVERVIEW

50104: STARTER,ENGINE,ELECTRICAL.

This smart switch box allows you to connect four computers to the same printer. The switch box automatically switches to the computer that is attempting to print. All connectors on the box are 25-pin female.

You should therefore use a switch box cable to connect the box to the computer and an ordinary Centronics printer cable for the connected printer. NB: This switch box does not support four printers on one computer. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-197-0385, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 50104
NSN: 5340-00-197-0385
NIINs: 001970385, 005701139, 005928173, 008035535, 010318566, 010852968, 010875173, 011008716, 011204257, 013715231, 014125505, 014437513, 014581081, 015596270, 016124192
FSC: 5340 — Hardware, Commercial
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
special_featuresPEDESTAL CHAIR
end_item_identification2355015393579
part_name_assigned_by_controlling_agencyFOOT REST
NSN5340-00-197-0385
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 50104 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 0.406 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.372 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
RADIUS0.406 INCHES NOMINAL IN
OUTSIDE DIAMETER0.372 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
MATERIAL THICKNESS0.065 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 7
02531Reference document
Same NSN cross-reference
Reference document — Secondary reference
103889Reference document
Same NSN cross-reference
Reference document — Secondary reference
303SZ21Reference document
Same NSN cross-reference
Reference document — Secondary reference
172525Reference document
Same NSN cross-reference
Reference document — Secondary reference
X981Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-P-20691Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 50104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50104?
50104 is a STARTER,ENGINE,ELECTRICAL manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50104?
There are 7 known substitutes for 50104: 02531, 103889, 303SZ21 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50104?
50104 is cataloged in the U.S. Government catalog under NSN 5340-00-197-0385. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.